NZXT released new H5 series chassis and T120 series CPU air cooling radiator
NZXT announced the launch of the H5 series chassis and T120 series CPU air-cooled radiators. The H510 mid-tower case is a popular ATX case under NZXT. The H5 series released this time is its upgraded version, including the H5 Flow and H5 Elite, both available in black and white. The former uses a perforated front panel for optimal heat dissipation, while the latter uses a tempered front glass panel to perfectly showcase the DIY design inside the player’s chassis. The new product follows the classic design language of the H-series chassis, with better overall cooling performance and an upgraded cable management system. Players can also use NZXT CAM software to synchronize with compatible devices to create colorful RGB lighting effects.
The overall dimensions of the H5 series chassis are 464 x 227 x 446 mm. The H5 Flow and H5 Elite weigh 7.01kg and 8.1kg respectively and can support Mini-ITX, Micro-ATX, and ATX motherboards. It provides one 3.5-inch hard drive bay and up to two 2.5-inch hard drive bays; there are 7 PCI expansion slots; the height limit of the CPU radiator is 165mm, the length of the graphics card is 365mm, the cable management gap is 23mm, and the front radiator position gap is 45mm. On the front I/O configuration of the chassis, there is a USB 3.2 Gen1 Type-A interface, a USB 3.2 Gen2 Type-C interface, and a headphone audio jack.
In terms of the location of cooling fans, two 120/140mm fans can be installed in the front, supporting 120/240/280 water cooling; a 120mm fan can be installed at the rear to support 120 water cooling; two 120mm fans can be installed on the top, supporting 120/240 water cooling; a 120mm fan can be installed at the bottom. The H5 Flow is pre-installed with two F120 fans, and the H5 Elite is pre-installed with two F140 RGB fans and one F120Q fan.
This time, NZXT also brought the T120 series CPU air-cooled radiator, with an overall size of 120 x 66 x 159 mm, a copper base size of 40 x 35 mm, and four heat pipes. The series is divided into the T120 without lights and the T120 RGB with RGB lighting effects, both available in black and white.
T120 is equipped with an F120P fan, the speed is 500~1800±300 RPM, the air volume is 21.67~78.02 CFM, the air pressure is 0.75~2.7 mmH2O, and the noise value is 17.9~30.6 dB(A). The T120 RGB is equipped with an F120 RGB fan, the speed is 500~1800±300 RPM, the air volume is 13.94~50.18 CFM, the air pressure is 0.75~2.7 mmH2O, and the noise value is 17.2~27.5 dB(A).
NZXT said the new products will be available in November.