packet agent: toolset for network packet capture, forwarding and analysis

by ddos ·

Netis Packet Agent

Netis Packet Agent is an open-source project to deal with such a situation: it captures packets on Machine A but has to use them on Machine B. This case is very common when you try to monitor network traffic in the LAN but the infrastructure is incapable, for example

  • There is neither a TAP nor SPAN device in a physical environment.
  • The Virtual Switch Flow Table does not support the SPAN function in a virtualization environment.

Also, this project aims at developing a suite of low-cost but high-efficiency tools to survive the challenge above.

  • pktminerg is the very first one, which makes you easily capture packets from a NIC interface, encapsulate them with GRE and send them to a remote machine for monitoring and analysis.

Packet Agent

 

With 4 utilities:

  • pcapcompare is a utility for comparing 2 different pcap files.
  • gredump is used for capturing GRE packet with filter, and save them to pcap file.
  • gredemo is a demo app which is used to read packet from a pcap file and send them all to remote NIC. This can be only used when built from source code.
  • probeDaemon is a new added module from v0.7.0, which is responsible for the management of the pktminerg process. It can pull and kill pktminerg process and set the parameters of pktminerg in the command line. This module should work with CPM (Cloud Probe Manager)， which provides a user interface to set the strategies of pktminerg and can also display the statistis reported from pktminerg in graphs. You can contact Netis for the further support of CPM, or you can also develop your CPM. Currently, no probeDaemon for Win, which will be released later.

Install && Use

Copyright (c) 2018, Netis Technologies Co., Ltd. All rights reserved.

Tags: Packet Agent